unconfigure bootprelay dhcp-agent source-vlan

unconfigure bootprelay dhcp-agent source-vlan {vr vrid}

Description

Unconfigures the source VLAN to use as the source IP address in the BOOTPrelay packet.

Syntax Description

bootprelay Specifies BOOTPrelay agent information option.
dhcp-agent Specifies DHCP agent.
source-vlan Specifies unconfiguring the source loopback VLAN to use as the source IP address in the giaddr field when BOOTPrelay is used for anycast VLAN.
vr Specifies unconfiguring the VLAN on the specific virtual router ID.
vrid Specifies the virtual router ID.

Default

If you do not specify a VR, the unconfiguring occurs on VR-Default.

Usage Guidelines

To view the selected source VLAN, use the command show bootprelay configuration {ipv4 | ipv6} {{vlan vlan_name } | {vr vr_name}} .

Example

The following example unconfigures the VLAN to use as the source IP address in the BOOTPrelay packet on vr "vr1":

# unconfigure bootprelay dhcp-agent source-vlan vr vr1

History

This command was first available in ExtremeXOS 30.7.

Platform Availability

This command is available on all Universal switches supported in this document.