unconfigure policy autoclear

unconfigure policy autoclear interval

Description

Disables the automatic clearing of rule usage statistics.

Syntax Description

autoclear Designates setting parameters for auto-clearing the policy rule usage statistics.
interval Designates disabling automatic clearing of rule usage statistics.

Default

N/A.

Usage Guidelines

If you have configured Syslog and/or trap actions to notify you when a policy rule is used by using the following command: configure policy rule profile_index [{app-signature group group name name} | ether ether | icmp6type icmp6type | icmptype icmptype | ip6dest ip6dest |ipdestsocket ipdestsocket | ipfrag | ipproto ipproto | ipsourcesocket ipsourcesocket | iptos iptos | ipttl ipttl | macdest macdest | macsource macsource | port port | tcpdestportIP tcpdestportIP | tcpsourceportIP tcpsourceportIP | udpdestportIP udpdestportIP | udpsourceportIP udpsourceportIP ] {mask mask } {port-string [ port_string | all]} {storage-type [non-volatile | volatile]} {drop | forward} {syslog syslog} {trap trap} {cos cos } {mirror-destination control_index} {clear-mirror} , this command disables automatic clearing of rule usage statistics.

To view the auto-clear interval, use the following command:

show policy autoclear interval

Example

The following example disables automatic clearing of rule usage statistics:

# unconfigure policy autoclear interval
# show policy autoclear interval
Stats autoclear interval DISABLED.

History

This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on all Universal switches supported in this document.