show bootprelay configuration ipv4

show bootprelay

Description

Displays various BOOTP Relay configuration details.

Syntax Description

ipv4 Specifies unconfiguring the DHCPv4 BOOTP Relay service (default).
ipv6 Specifies unconfiguring the DHCPv6 BOOTP Relay service.
vlan Unconfigures BOOTP relay for a specified VLAN.
vlan_name Specifies the VLAN name.
include-secondary Removes the include-secondary configuration for the specified VLAN.

Default

Usage Guidelines

Use this command to display various bootprelay configuration details.

Example

The following command displays IPv4 bootprelay statistics:

# show bootprelay configuration ipv4
DHCPv4 BOOTP Relay   : Enabled on virtual router "VR-Default"    
    Include Secondary : Enabled (parallel)    
    BOOTP Relay Servers  :    
    DHCP Relay Agent Information Option: Enabled    
    DHCP Relay Agent Information Check : Disabled    
    DHCP Relay Agent Information Policy: Replace 
VLAN                                   DHCPv4 BOOTP Relay 
------------------------               ------------------
VLAN "Default":    
    BOOTP Relay                        : Enabled    
    Include Secondary                  : Enabled (sequential)    
    BOOTP Relay Servers                : 192.168.1.1    
    DHCP Relay Agent Information Option: Enabled    
    DHCP Relay Agent Information Check : Disabled    
    DHCP Relay Agent Information Policy: Replace
VLAN "v1":    
    BOOTP Relay                        : Enabled    
    Include Secondary                  : Enabled (sequential)    
    BOOTP Relay Servers                : 10.1.1.1    
    DHCP Relay Agent Information Option: Enabled    
    DHCP Relay Agent Information Check : Disabled    
    DHCP Relay Agent Information Policy: Replace

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on all Universal switches supported in this document.