show fabric attach ports authentication

show fabric attach ports [port_list | all] authentication {detail}

Description

Shows Fabric Attach authentication information.

Syntax Description

ports Specifes ports to show.
port_list Specifies the list of ports to show.
all Shows information for all ports in the system.
authentication Specifies showing Fabric Attach authentication information.
detail Specifies showing detailed Fabric Attach authentication information.

Default

N/A.

Usage Guidelines

This command shows the configuration settings from the configure fabric attach ports [port_list | all] authentication [ disable | enable | key {key | default | encrypted encrypted_key}] command.

Example

The following example shows Fabric Attach authentication information on port 1:
# show fabric attach ports 1 authentication
Port       Authentication
---------  --------------
1          Enabled
The following example shows detailed Fabric Attach authentication information on all ports:
show fabric attach ports all authentication detail
Port       Authentication  Encrypted Key
---------  --------------  -----------------------------------------------------------
1          Enabled         "#$GuZJvU40xnRwKd+PUlsBxSwfpQYr5w=="
2          Disabled        "#$4MoonVveq8vrk9BrKO9I673CCDfnWUEcAcKeTZcvQup3XFApn36GWvMGXAl3TpufrUXPZPV2geztybwV/0xfLoFt+zg/4g=="

History

This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on all Universal switches supported in this document.