show access-list meter

show access-list meter {metername} [any | ports [port_list ] | vlan vlanname ] {ingress | egress}

Description

Displays the specified access list meter statistics and configurations.

Syntax Description

meter-name Specifies the ACL meter to display.
out-of-profile Show the meter out-of-profile status.
disabled-ports Show the meter out-of-profile status that resulted in disable-port action.
port_list Specifies the port list name to display the meters on.
port_group Specifies a port group name to display the meters on.
vlan_name Specifies to display the meters on the VLAN.
global-count Counter of all the rules using a per-port meter.
ingress ACLs applied to ingress.
egress ACLs applied to egress.

Default

N/A.

Usage Guidelines

Use this command to display the ACL meters.

Example

The following example displays access list meter information for port 7:1:

# show access-list meter ports 1-4
==========================================================================
Policy Name      Vlan Name        Port
                   Committed        Max Burst    Out-of-Profile  Out-of-Profile  
     Meter         Rate (Kbps)      Size         Action    DSCP    Packet Count
===============================================================================
(none)           *                2     
    ingmeter3          3000000 Kbps  300000 Kb     - - - Dr   -          123456
    ingmeter4          4000000 pps   400000 pkt    - - - Dr   -               0
(none)           *                3     
    ingmeter12         Max           123456 Kb     - - - Dr   -               0
    ingmeter3          3000000 Kbps  300000 Kb     - - - Dr   -               0
    ingmeter4          4000000 pps   400000 pkt    - T - Dr   -               0
(none)
    ingmeter12         Max           123456 Kb     L T D DrP  64         871234
    ingmeter3          3000000 Kbps  300000 Kb     - - D Dr    -              0
    ingmeter4          4000000 pps   400000 pkt    L - D Dr    -              0

Action   :  (D) Disable Port, (Dr) Drop, (DrP) Set Drop Precedence,
            (L) Log, (T) Trap

History

This command was available in ExtremeXOS 11.1.

Platform Availability

This command is available on all Universal switches supported in this document.