clear ports link-flap-detection status
clear ports [port_list | all] link-flap-detection
status
Description
Manually enables ports that have been disabled due to excessive link-flapping.
Syntax Description
ports | Physical ports. |
port_list | List of ports that you want to enable that were disabled due to excessive link flapping. |
all | Enables all ports in the system that were disabled due to excessive link flapping. |
status | Enable ports currently in disabled state due to excessive link flapping. |
Default
N/A
Usage
Ports that have been disabled due to excessive link flapping cannot be enabled using the enable port command. They must be enabled using the clear ports link-flap-detection status command.
Example
The following example re-enables all ports on the switch that were disabled due to excessive link flapping:
clear ports all link-flap-detection status
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X620, X440-G2 series switches