configure virtual-network remote-endpoint vxlan ipaddress monitor
Description
This command enables or disables statistics monitoring (byte/packet counters) on a Virtual Network remote endpoint.
Syntax Description
ipaddress | An existing interface IPv4 address. |
vr | VR/VRF instance the IPv4 address is configured on. |
vr_name | An existing VR/VRF name. |
on | Enable statistics. |
off | Disable statistics. |
Default
Off.
Usage Guidelines
The command applied on dynamic remote endpoint is not saved to the configuration. If you want it to be saved, convert the remote endpoint to static using the command create virtual-network remote-endpoint vxlan ipaddress ipaddress {vr vr_name}.
Example
To enable statistics monitoring on an existing Virtual Network remote endpoint:
configure virtual-network remote-endpoint vxlan ipaddress 10.10.10.146 monitor on
configure virtual-network remote-endpoint vxlan ipaddress 10.10.10.146 monitor on
History
This command was first available in ExtremeXOS 21.1.
Platform Availability
This command is supported on the Summit X770, X670-G2 standalone, and stacks with X770 and X670-G2 slots only.