disable log display
Description
Disables the sending of messages to the console display.
In a stack, this command is applicable only to Master and Backup nodes and not applicable to the standby nodes.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
If the log display is disabled, log information is no longer written to the serial console.
This command setting is saved to FLASH and determines the initial setting of the console display at boot up.
You can also use this following command to control logging to different targets:
This command is equivalent to disable log target console-display command.
Example
The following command disables the log display:
disable log display
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.