create ospfv3 area
create ospfv3 area
area_identifier
Description
Creates an OSPFv3 area.
Syntax Description
area_identifier | Specifies an OSPFv3 area, a four-byte, dotted decimal number. |
Default
Area 0.0.0.0.
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates a non-backbone OSPFv3 area:
create ospfv3 area 1.2.3.4
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.