disable icmp redirects ipv6 fast-path
disable icmp redirects ipv6
fast-path
Description
When disabled (default), only slow path packets (packets that cannot be forwarded by hardware) may trigger ICMP redirects.
Syntax Description
fast-path | Only slow path packets (packets that cannot be forwarded by hardware) may trigger ICMP redirects. |
Default
Disabled.
Usage Guidelines
Use this command so that only slow path packets (packets that cannot be forwarded by hardware) may trigger ICMP redirects.
Example
The enabled or disabled setting is displayed when entering the command:
# show ipconfig ipv6 Route Sharing : Disabled ICMP Redirect for Fast Path : Enabled Max Shared Gateways : Current: 4 Configured: 4 Interface IPv6 Prefix Flags v1 2001::1/24 -EUf---R- v1 fe80::204:96ff:fe1e:ec00%v1/64 -EUfP--R- Flags : D - Duplicate address detected on VLAN, T - Tentative address E - Interface enabled, U - Interface up, f - IPv6 forwarding enabled, i - Accept received router advertisements enabled, R - Send redirects enabled, r - Accept redirects enabled P - Prefix address BD-8810.2 #
History
This command was first available in ExtremeXOS 15.2.
Platform Availability
This command is available on all platforms.