show ipconfig
Description
Displays configuration information for one or more VLANs in the current VR context.
Syntax Description
vlan_name | Specifies a VLAN name. |
Default
N/A.
Usage Guidelines
If no VLAN information is specified, then global IP configuration is displayed. Otherwise, specific VLAN information is displayed.
Example
* switch # show ipconfig Use Redirects : Disabled IpOption LSRR : Enabled IpOption SSRR : Enabled IpOption RR : Enabled IpOption TS : Enabled IpOption RA : Enabled Route Sharing : Disabled Originated Packets : Don't require ipforwarding IP Fwding into LSP : Disabled Max Shared Gateways : Current: 4 Configured: 4 Route Sharing Hash : XOR, Custom Method Ping Protection : Enabled for static routes Interval: 2 Misses: 3 IRDP: Advertisement Address: 255.255.255.255 Maximum Interval: 600 Minimum Interval: 450 Lifetime: 1800 Preference: 0 Interface IP Address Flags nSIA data2 200.0.0.1 /24 EUf---MPuRX-------- 0 inet 1.1.1.2 /24 EUf---MPuRX-------- 0 mytun 2.0.0.2 /24 EU----MPuRX-------- 0
History
This command was first available in ExtremeXOS 10.1.
The ipv4 keyword was added in ExtremeXOS 11.2.
This command changed to display information for the current VR context in ExtremeXOS 12.5.
Ping protection information added in ExtremeXOS 22.1.
Route sharing hashing algorithm (default or custom) added in ExtremeXOS 22.1.
Platform Availability
This command is available on all platforms.