show inline-power configuration ports
Description
Displays inline power configuration information for the specified ports.
Syntax Description
port_list | Specifies one or more ports. |
Default
N/A.
Usage Guidelines
-
Config—Indicates whether the port is enabled to provide inline power:
-
Enabled: The port can provide inline power.
-
Disabled: The port cannot provide inline power.
-
-
Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
-
Label—Displays a text string, if any, associated with the port.
Example
The following command displays inline power configuration information for ports 1 to 10 on a switch:
show inline-power configuration port 1-10
Following is sample output from this command:
Port Config Operator Limit Priority Label 1 Enabled 15000 mW Low 2 Enabled 15000 mW Low 3 Enabled 15000 mW Low 4 Enabled 15000 mW Low 5 Enabled 15000 mW Low 6 Enabled 15000 mW Low 7 Enabled 15000 mW Low 8 Enabled 15000 mW Low 9 Enabled 15000 mW Low 10 Enabled 15000 mW Low
History
This command was first available in ExtremeXOS 11.1
Platform Availability
This command is available on the PoE devices listed in Extreme Networks PoE Devices.