show iproute ipv6 origin
show iproute ipv6 origin [direct | static | blackhole | ripng | ospfv3 | ospfv3-intra | ospv3-inter | ospfv3-extern1 | ospfv3-extern2 | isis | isis-leve1-1 | isis-level-2 | isis-level-1-external | isis-level-2-external | bgp | ibgp | ebgp | bootp] {vr
vr_name}
Description
Displays the contents of the IPv6 routing table for routes with the specified origin.
Syntax Description
direct | Specifies direct routes. |
static | Specifies static routes. |
blackhole | Specifies blackhole routes. |
ripng | Specifies RIPng routes. |
ospfv3 | Specifies OSPFv3 routes. |
ospfv3-intra | Specifies OSPFv3 Intra routing. |
ospfv3-inter | Specifies OSPFv3 Inter routing. |
ospfv3-extern1 | Specifies OSPFv3 External 1 routing. |
ospfv3-extern2 | Specifies OSPFv3 External 2 routing. |
isis | Specifies IS-IS routes. |
isis-level-1 | Specifies IS-IS Level 1 routing. |
isis-level-2 | Specifies IS-IS Level 2 routing. |
isis-level-1-external | Specifies IS-IS Level 1 External routing. |
isis-level-2-external | Specifies IS-IS Level 2 External routing. |
bgp | Specifies Border Gateway Protocol. |
ibgp | Specifies Interior BGP route. |
ebgp | Specifies Exterior BGP route. |
bootp | Specifies BOOTP route. |
vr_name | Specifies a VR or VRF. |
Default
N/A.
Usage Guidelines
None.
Example
The following example displays the RIPng routes:
show iproute ipv6 origin ripng
History
This command was first available in ExtremeXOS 11.2.
The bootp attribute was added in 15.7.1
Platform Availability
This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.