configure ospf metric-table
configure ospf metric-table 10M
cost_10m
100M
cost_100m
1G
cost_1g {2.5G
cost_2_5g} {5G
cost_5g} {10G
cost_10g} {25Gcost_25g} {40G
cost_40g}{50G
cost_50g}{100G
cost_100g}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally, the 2.5 Gbps, 5 Gbps, 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, and 100 Gbps interfaces.
Syntax Description
cost | Specifies the interface cost for the indicated interfaces. |
Default
- 10 Mbps—The default cost is 10.
- 100 Mbps—The default cost is 5.
- 1 Gbps—The default cost is 4.
- 2.5 Gbps—The default cost is 3.
- 5 Gbps—The default cost is 3.
- 10 Gbps—The default cost is 2.
- 25 Gbps—The default cost is 2.
- 40 Gbps—The default cost is 2.
- 50 Gbps—The default cost is 2.
- 100 Gbps—The default cost is 1.
Usage Guidelines
Not applicable.Example
The following command configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeXOS 10.1.
The 40 Gbps parameter was added in ExtremeXOS 12.6.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.