show rip interface
Description
Displays RIP-specific configuration and statistics for all VLANs.
Syntax Description
detail |
Specifies detailed display. |
Default
Show summary output for all interfaces.
Usage Guidelines
-
VLAN name.
-
IP address and mask.
-
interface status.
-
packets transmitted.
-
packets received.
-
number of triggered updates.
-
cost.
-
VLAN name.
-
IP address and mask.
-
tx mode.
-
rx mode.
-
cost.
-
peer information (for each peer).
-
age.
-
version.
-
received packets.
-
received updates.
-
received bad packets.
-
received bad routes.
-
-
in policy.
-
out policy.
-
trusted gateway policy.
-
packets transmitted.
-
sent triggered updates.
-
packets received.
-
bad packets received.
-
bad routes received.
Example
The following command displays the RIP configuration for all VLANS:
show rip interface
The following is sample output from this command:
# show rip interface VLAN IP Address Flags Sent Rcvd Triggered Cost Packets Packets Updates Flags: (f) Interface Forwarding Enabled, (i) Interface RIP Enabled (n) Multinetted VLAN, (r) Router RIP Enabled
The following command displays RIP-specific statistics for all VLANs:
show rip interface detail
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms with an Edge, Advanced Edge, or Core license.