configure qosprofile wred
Description
Configures WRED on the specified QoS profile for the specified port.
Syntax Description
|
Default
- Minimum threshold—100%
- Maximum threshold—100%
- Maximum drop rate—100%
- Average weight—4
Usage Guidelines
The max_drop_rate, min_threshold, and max_threshold parameters apply to the specified color. The avg_weight parameter applies to all colors on the specified QoS profile. Increasing the avg_weight value reduces the probability that traffic is dropped. Conversely, decreasing the avg_weight value increases the probability that traffic is dropped.
Example
The following example configures WRED settings for port 2:1, QoS profile qp3, color green:
configure qosprofile qp3 wred color tcp green min-threshold 80 max-threshold 95 max-drop-rate 75 ports 2:1
The following example configures the average weight for port 2:1, QoS profile qp2:
configure qosprofile qp2 wred avg-weight 4 ports 2:1
The following example configures WRED settings for non-TCP traffic on port 4, QoS profile qp3:
configure qosprofile qp3 wred color non-tcp any min-threshold 10 ports 4
The following example configures WRED settings using "wredGroup" as the port_group variable:
configure qosprofile qp8 wred color tcp red min-threshold 25 max-streshold 75 max-drop-rate 30 ports wredGroup
History
This command was first available in ExtremeXOS 12.7.
The port_group variable was added in ExtremeXOS 16.1.
Platform Availability
This command is available on all platforms.