configure rip vlan txmode
configure rip [vlan vlan_name | all] txmode [none | v1only | v1comp | v2only]
Description
Changes the RIP transmission mode for one or all VLANs.
Syntax Description
vlan_name | Specifies to apply settings to a specific VLAN name. |
all | Specifies all VLANs. |
none | Specifies to not transmit any packets on this interface. |
v1only | Specifies to transmit RIP version 1 format packets to the broadcast address. |
v1comp | Specifies to transmit RIP version 2 format packets to the broadcast address. |
v2only | Specifies to transmit RIP version 2 format packets to the RIP multicast address. |
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the transmit mode for the VLAN finance to transmit version 2 format packets to the broadcast address:
configure rip finance txmode v1comp
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms with an Edge, Advanced Edge, or Core license.