configure erps timer wait-to-block
configure {erps} ring-name
timer
wait-to-block [ default | milliseconds]
Description
Configure a wait-to-block timer for revertive operations on RPL owner initiated reversion.
Syntax Description
ring-name | Alphanumeric string that identifies the ERPS ring. |
default | The default value, 5500 milliseconds. |
milliseconds | The time interval to wait before restoring, with a range of 5000 to 7000 milliseconds. |
Default
The default is 5500 milliseconds.
Usage Guidelines
Use this command to configure a wait-to-block timer for revertive operations on RPL owner-initiated reversion.
Example
The following command sets the wait-to-block timer to 6000 milliseconds for an ERPS ring named “ring1”:
configure erps ring1 timer wait-to-block 6000
History
This command was first available in ExtremeXOS 15.1.