enable network-clock gptp ports
enable network-clock gptp ports
[port_list {only} | all]
Description
Enables gPTP on one or more ports.
Syntax Description
port_list | Specifies one or more of the switch‘s physical ports. |
only |
Apply change only to specified port, even if port is master of a load sharing group. |
all | Specifies all of the switch‘s physical ports. |
Default
Disabled.
Usage Guidelines
Use this command to configure on which ports gPTP runs. gPTP does not run on any ports if it is not first enabled in the switch by the enable network-clock gptp command.
Example
enable network-clock gptp ports 4
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch..