enable snmp traps l3vpn
enable snmp traps l3vpn {vr
vr_name}
Description
Use this command to turn on SNMP trap support for L3 VPN.
Syntax Description
vr_name | Specifies the name of the parent VR where this RFC 4382 scalar is applied. If VR name is not provided, then this command is applied to the VR in the current context. |
Default
Enabled.
Usage Guidelines
Use this command to enable generation of L3VPN SNMP traps—mplsL3VpnVrfUp and mplsL3VpnVrfDown. These trap notifications are sent under the following conditions:
- mplsL3VpnVrfUp—first IP VLAN becomes active and administrative state is enabled.
- mplsL3VpnVrfDown—last active IP VLAN becomes inactive OR administrative state is disabled.
Example
The following example enables L3 VPN SNMP traps support on the switch:
enable snmp traps l3vpn vr vr-default
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on all platforms.