disable stpd rapid-root-failover
Description
Disables rapid root failover for STP recovery times.
Syntax Description
stpd_name | Specifies an STPD name on the switch. |
Default
Disabled.
Usage Guidelines
This command is applicable for STPDs operating in 802.1D.
After you have created the STPD with a unique name, the keyword stpd is optional.
To view the status of rapid root failover on the switch, use the show stpd command. The show stpd command displays information about the STPD configuration on the switch including the enable/disable state for rapid root failover.
Example
The following command disables rapid root fail over on STPD Backbone_st:
disable stpd backbone_st rapid-root-failover
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.