configure vr delete ports
Description
Removes a list of ports from the VR specified.
Syntax Description
vr-name | Specifies the name of the VR. |
port_list | Specifies the ports to remove from the VR. |
Default
By default, all ports are assigned to VR-Default.
Usage Guidelines
When a new VR is created, by default, no ports are assigned, no VLAN interface is created, and no support for any routing protocols is added. Use this command to remove ports from a VR. Since all ports are initially assigned to VR-Default, you might need to delete the desired ports first from the VR where they reside before you add them to the desired VR.
Example
The following example removes all the ports on slot 2 from the VR "vr-acme":
configure vr vr-acme delete ports 2:*
History
This command was first available in ExtremeXOS 11.0.
Platform Availability
This command is available on Summit X450-G2, X460-G2, X670-G2, and X770 series switches.