configure netlogin ports
configure netlogin ports [all | port_list] [allowed-users
allowed_users | authentication mode [optional | required] | trap [all-traps | no-traps | [{success} {failed} {terminated} {max-reached}]]]
Description
Use this command to set the NetLogin trap setting for system, module, and ports.
Syntax Description
all | Configure all ports in the system. |
port_list | List of ports to configure. |
allowed-users | Number of users allowed per port. |
allowed_users | Number of users allowed per port. Range 0-65535. |
authentication | Configure port authentication settings. |
mode | Port authentication mode. |
optional | Authentication optional. |
required | Authentication required. |
all-traps | Enable sending all trap types. |
no-traps | Disable sending all trap types. |
success | Enable sending success trap. |
failes | Enable sending failed trap. |
terminated | Enable sending terminated trap. |
max-reached | Enable sending max number users reached trap |
Default
Optional.
Usage Guidelines
None.
Example
This example shows how to enable all NetLogin port trap setting:
configure netlogin trap port 1:1 all
History
This command was first available in ExtremeXOS 16.1.
Platform Availability
This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770.