configure ospf add vlan area
configure ospf add vlan [vlan-name | all] area
area-identifier {passive}
Description
Enables OSPF on one or all VLANs (router interfaces).
Syntax Description
vlan-name | Specifies a VLAN name. |
all | Specifies all VLANs. |
area-identifier | Specifies the area to which the VLAN is assigned. |
passive | Specifies to stop sending and receiving hello packets on this interface. |
Default
Disabled.
Usage Guidelines
Not applicable.
Example
The following command enables OSPF on a VLAN named accounting:
configure ospf add vlan accounting area 0.0.0.1
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.