configure ospfv3 spf-hold-time
Description
Configures the minimum number of seconds between Shortest Path First (SPF) recalculations.
Syntax Description
spf-hold-time | SPF hold time. |
seconds | Specifies a time in seconds. The range is 0 to 300 seconds. |
Default
3 seconds.
Usage Guidelines
Setting the interval too high will force OSPFv3 to run SPF calculations less frequently. This will reduce the CPU load, but will cause delay in routes getting updated in the IPv6 routing table. Setting the interval too low will decreases the interval between SPF calculations, but will increase the processing load on CPU.
Example
The following command configures the minimum number of seconds between Shortest Path First (SPF) recalculations:
configure ospfv3 spf-hold-time 6
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.