show ssh2
show ssh2
Description
Shows all SSHv2 configuration information, including the ciphers/MACs that are enabled, and Diffie-Hellman minimal supported group.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Example
The following example shows all SSHv2 configuration information:
# show ssh2 SSH module configuration details: SSH Access : Disabled Key validity : Invalid TCP port : 22 VR : all Access profile : not set Secure Mode : Off Diffie-Hellman Groups : 1 (1024 bits prime), 14 (2048 bits prime) Idle time : 60 minutes Ciphers : Not configured Macs : hmac-md5-etm@openssh.com, hmac-sha1-etm@openssh.com, hmac-sha2-256-etm@openssh.com, hmac-sha2-512-etm@openssh.com, hmac-ripemd160-etm@openssh.com, hmac-sha1-96-etm@openssh.com, hmac-md5-96-etm@openssh.com, hmac-md5, hmac-sha1, hmac-sha2-256, hmac-sha2-512, hmac-ripemd160, hmac-ripemd160@openssh.com, hmac-sha1-96, hmac-md5-96
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
This command is available on Summit X440-G2, X450-G2, X460-G2, X620, X670-G2, X770 series switches.