enable snmp traps configuration
enable snmp traps configuration [save |
change]
Description
Enables sending SNMP trap when saving or changing the switch configuration.
Syntax Description
configuration | Sends SNMP trap for switch configuration. |
save | Generates SNMP trap when switch configuration is saved (default is disabled). |
change | Generates SNMP trap when switch configuration is changed (default is disabled). |
Default
The default is that SNMP traps are disabled for switch configuration changes/saves.
Example
The following example enables SNMP traps for switch configuration changes:
enable snmp traps configuration change
History
This command was first available in ExtremeXOS 22.1.
Platform Availability
Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X620, X440-G2 series switches.