disable icmp address-mask
Description
Disables the generation of an ICMP address-mask reply on one or all VLANs.
Syntax Description
name | Specifies a VLAN name. |
Default
Disabled.
Usage Guidelines
Disables the generation of an ICMP address-mask reply (type 18, code 0) when an ICMP address mask request is received. The default setting is disabled. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands.
Example
The following example disables the generation of an ICMP address-mask reply on VLAN "accounting":
disable icmp address-mask vlan accounting
History
This command was first available in ExtremeXOS 10.1.
The default was changed to disabled in ExtremeXOS 11.0.
Platform Availability
This command is available on all platforms.