enable snmp traps
Description
Turns on SNMP trap support.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
An authorized trap receiver can be one or more network management stations on your network. The switch sends SNMP traps to all trap receivers.
To view if SNMP traps are being sent from the switch, use the show management command. The show management command displays information about the switch including the enabled/disabled state of SNMP traps being sent.
Example
The following command enables SNMP trap support on the switch:
enable snmp traps
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.