configure ports auto-polarity
Description
Configures the autopolarity detection feature on the specified Ethernet ports.
Syntax Description
port_list |
Specifies one or more ports on the switch. |
off |
Disables the autopolarity detection feature on the specified ports. |
on |
Enables the autopolarity detection feature on the specified ports. |
Default
Enabled.
Usage Guidelines
This feature applies to only the 10/100/1000 BASE-T ports on the switch and copper medium on Summit combination ports.
When autopolarity is disabled on one or more Ethernet ports, you can verify that status by using the following command:
show ports information detail
Example
The following command disables the autopolarity detection feature on ports 5 to 7 on a Summit series switch:
configure ports 5-7 auto-polarity off
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on all platforms.