disable clipaging
Description
Disables pausing at the end of each show screen.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
The command line interface (CLI) is designed for use in a VT100 environment.
Most show command output will pause when the display reaches the end of a page. This command disables the pause mechanism and allows the display to print continuously to the screen.
CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI paging from within the current configuration, it only affects that session. For new or existing sessions, paging is enabled by default. This setting cannot be saved.
To view the status of CLI paging on the switch, use the show management command. The show management command displays information about the switch including the enable/disable state for CLI paging.
Example
The following command disables clipaging and allows you to print continuously to the screen:
disable clipaging
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.