efa inventory device setting show

Displays device settings.

Syntax

efa inventory device setting show [ --ip device-ip ]

Parameters

--ip device-ip
Specifies IP address of the device.

Examples

This example shows the current inventory settings for the specified device.
efa inventory device setting show --ip 10.20.24.10 

+--------------------------------+-------+ 
|              NAME              | VALUE | 
+--------------------------------+-------+ 
| Maintenance Mode Enable On     | No    | 
| Reboot                         |       | 
+--------------------------------+-------+ 
| Maintenance Mode Enable        | No    | 
+--------------------------------+-------+ 
| Maintenance Convergence Time   |       | 
+--------------------------------+-------+ 
| MCT Bring-up Delay             |       | 
+--------------------------------+-------+ 
| Health Check Enabled           | No    | 
+--------------------------------+-------+ 
| Health Check Interval          | 6m    | 
+--------------------------------+-------+ 
| Health Check Heartbeat Miss    | 2     | 
| Threshold                      |       | 
+--------------------------------+-------+ 
| Periodic Backup Enabled        | Yes   | 
+--------------------------------+-------+ 
| Config Backup Interval         | 24h   | 
+--------------------------------+-------+ 
| Config Backup Count            | 4     | 
+--------------------------------+-------+ 
| Prefix Independent Convergence | No    | 
+--------------------------------+-------+ 
| Static Prefix Independent      | Yes   | 
| Convergence                    |       | 
+--------------------------------+-------+ 
| Maximum Load Sharing Paths     | 64    | 
+--------------------------------+-------+