efa inventory device interface set-fec
Configures forwarding error correction (FEC) on the SLX interface.
- --ip device-ip
- Specifies a comma-separated range of device IP addresses. For example: 10.1.1.13,10.1.1.50,10.1.1.101.
- --if-type eth
- Specifies that the interface
type is
eth
(Ethernet), which is the default setting. - --if-name if-list
- Specifies a comma-separated list of interface names. For example: 0/50-52,0/45,0/5:4,0/5:1-2.
- --mode { fs-fec | rs-fec | auto | disabled }
- Specifies the FEC mode for the ports.
The configuration you set is persisted in the EFA database.
The default value of FEC configured by SLX is auto, that is auto-negotiation.
DRC and idempotency are supported.
efa inventory device interface set-fec –-ip 10.20.246.10 --if-type ethernet –-if-name 0/20 –mode rs-fec