efa policy prefix-list create
Creates an IPv4 prefix list.
Syntax
Parameters
- --type string
- Specifies the type of prefix list. The only
valid value is
ipv4. - --name string
- Specifies the name of the prefix list.
- --rule stringArray
- Specifies the rule of the prefix list, in the following format: seq[seq-num],action[permit/deny],prefix[IPv4 prefix],ge[prefix-len],le[prefix-len]. For example: seq[5],action[permit],prefix[10.0.0.0/8],ge[10],le[24].
Usage Guidelines
Execute efa policy prefix-list update --operation add-device to push the configuration on to the device.
Examples
This example creates an IPv4 prefix list.
$ efa policy prefix-list create –-name prefix_v4 –-type ipv4 –-rule seq[5],action[permit],prefix[10.0.0.0/8],ge[16]
This example creates an IPv4 prefix list with two rules.
efa policy prefix-list create --type ipv4 --name test1 --rule seq[5],action[permit],prefix[10.0.0.0/8],ge[16],le[24] --rule seq[10],action[deny],prefix[20.0.0.0/8],ge[14],le[24] Name: test1 +------+---------+--------+------------+----+----+---------+ | Type | Seq num | Action | Prefix | Ge | Le | Status | +------+---------+--------+------------+----+----+---------+ | ipv4 | 5 | permit | 10.0.0.0/8 | 16 | 24 | Success | +------+---------+--------+------------+----+----+---------+ | ipv4 | 10 | deny | 20.0.0.0/8 | 14 | 24 | Success | +------+---------+--------+------------+----+----+---------+ Prefix-list details --- Time Elapsed: 597.965605ms ---