efa tenant update
Allows changes to be made to a tenant after it has been created.
Syntax
Parameters
- --name tenant-name
- Specifies name of tenant.
- --description tenant-description
- Describes the tenant.
- --l2-vni-range range
- Specifies the contiguous range of Layer 2 VNIs in ascending order that are reserved for the tenant within the scope of a fabric.
- --l3-vni-range range
- Specifies the contiguous Range of L3 VNIs in ascending order will be reserved for the tenant within the scope of a fabric.
- --vlan-range range
- Specifies the range of VLANs to be reserved for the tenant.
- --vrf-count int number
- Specifies the number of VRFs to be reserved for the tenant.
- --enable-bd
- Enables BD capability for networks created under this tenant.
- --operation { desc-update | vni-update | port-add | port-delete | vlan-add | vlan-delete | vlan-update | num-vrf-update | enable-bd-update | mirror-destination-port-add | mirror-destination-port-delete }
- Specifies operation code.
- --port value
- Lists physical ports of devices which will be reserved for the asset. Example: SW1_IP[0/1],SW2_IP[0/5]
- --mirror-destination-port value
- xxx
- --force
- Forces the deletion on the tenant if the option is provided.
Examples
This example removes a VLAN range from the tenant.$ efa tenant update --name tenant21 --operation vlan-delete --vlan-range 201-300 Tenant updated successfully.This example adds a port to an existing tenant.
$ efa tenant update --name tenant21 --operation port-add --port 10.20.216.15[0/29] Tenant updated successfully.