The Extreme Management Center and Ridgeline include a RADIUS server that you can use for NMS server authentication. To configure this
server, do the following:
-
Add the IP address of each XNV-enabled switch as a RADIUS client.
-
Add each VM MAC address as a username (in upper case
and should not contain semicolon) and add the MAC address as the
password.
-
Add a remote access policy with the Extreme Networks
VSAs:
- Vendor code: 1916
- VSA ID: 213 (EXTREME_VM_NAME)
Example: MyVM1
- VSA ID: 214 (EXTREME_VM_VPP_NAME)
Example: nvpp1
- VSA ID: 215 (EXTREME_VM_IP_ADDR)
Example: 11.1.1.254
For instructions on configuring the Ridgeline
RADIUS server, refer to the Ridgeline documentation.
