This feature allows you to apply an ACL that causes matching packets to egress a specific port in a link aggregation (or load-sharing) group.
The following ACL action is added in support of this feature:
redirect-port-no-sharing port
The ACL overrides any load-sharing algorithm hash that is generated based on the lookup results.
If the selected port in a load-sharing group is down, the packets will be dropped.
Like the redirect-port action, the specified port must be a member of the egress VLAN.
Following is an example of a configuration and ACL policy that directs traffic matching 10.66.4.10 to LAG port 3:
enable sharing 2 group 2,3
radiomgmt.pol:
entry one {
if {
destination-address 10.66.4.10/32;
} then {
redirect-port-no-sharing 3;
}
}
config access-list radiomgmt any
This example would direct inband management traffic to specific radios connected to specific ports within a load-sharing group.