Example: MyVM1
Example: nvpp1
Example: 11.1.1.254
Note
For the Dynamic VLAN feature, the following VSAs are used:configure vm-tracking nms primary server 10.127.5.221 client-ip 10.127.8.12 shared-secret secret
After the repository server is configured (see Repository Server Setup), the following commands can be used to display the switch XNV feature status:
* Switch.33 # show vm-tracking nms server VM Tracking NMS : enabled VM Tracking NMS server connect time out: 3 seconds Primary VM Tracking NMS server: Server name : IP address : 10.127.5.221 Server IP Port: 1812 Client address: 10.127.8.12 (VR-Mgmt) Shared secret : qijxou Access Requests : 7 Access Accepts : 2 Access Rejects : 5 Access Challenges : 0 Access Retransmits: 0 Client timeouts : 0 Bad authenticators: 0 Unknown types : 0 Round Trip Time : 0
* Switch.32 # show vm-tracking ----------------------------------------------------------- VM Tracking Global Configuration ----------------------------------------------------------- VM Tracking : Enabled VM Tracking authentication order: nms VM Tracking nms reauth period : 0 (Re-authentication disabled) VM Tracking blackhole policy : none ----------------------------------------------------------- Port : 21 VM TRACKING : ENABLED Flags MAC AP IP Address Type Name ----------------------------------------------------------------------------- 00:04:96:27:c8:23 VB 11.1.1.101 VM vm_1 VPP nvpp1 00:04:96:27:c8:24 VB 11.1.1.102 VM vm_2 VPP nvpp2 ----------------------------------------------------------------------------- Flags : (A)uthenticated : L - Local, N - NMS, V - VMMAP (P)olicy Applied : B - Both, E - Egress, I – Ingress Number of Network VMs Authenticated: 1 Number of Local VMs Authenticated : 0 Number of VMs Authenticated : 1
* Switch.32 # show policy Policies at Policy Server: PolicyName ClientUsage Client BindCount --------------------------------------------------------------------- vmt/nvpp1 1 acl 1 vmt/nvpp2 1 acl 1 ---------------------------------------------------------------------