This command displays the general configuration of all the MPLS components and system wide configuration.
The output, shown below, displays the switch MPLS, RSVP-TE, and LDP configuration status. It also shows the configuration status of SNMP trap, EXP examination, and EXP replacement settings. The configured LSR ID are also shown.
# show mpls Virtual Router Name : VR-Default MPLS Admin Status : Enabled MPLS Oper Status : Enabled RSVP-TE Admin Status : Enabled RSVP-TE Oper Status : Enabled LDP Admin Status : Enabled LDP Oper Status : Enabled MPLS SNMP Traps : Disabled L2VPN SNMP Traps : Disabled EXP Examination : Enabled EXP Replacement : Disabled LSR ID : 192.99.1.5