To display information about a network or subscriber VLAN, use the command:
show vlan {virtual-router vr-name}
The following flags provide PVLAN specific information:
- s flat
- Identifies a network VLAN port that the system added to a subscriber VLAN. All
subscriber VLANs contain network VLAN ports that are marked with the s flag.
- L flag
- Identifies a subscriber VLAN port that is configured as a loopback
port.
- t flag
- Identifies a tagged network VLAN port on which tag translation is enabled. The t flag
only appears in the show vlan display for network VLANs.
- e flag
- Identifies a network VLAN port that is configured as an endpoint. The e flag only
appears in the show vlan display for network VLANs.
