The topology for a simple VRRP network example is shown in Simple VRRP Network.
Switch A is the IP address owner, and Switch B is configured as the backup.
The configuration commands for switch A are as follows:
configure vlan vlan1 ipaddress 192.168.1.3/24 enable ipforwarding vlan vlan1 create vrrp vlan vlan1 vrid 1 configure vrrp vlan vlan1 vrid 1 priority 255 configure vrrp vlan vlan1 vrid 1 add 192.168.1.3 enable vrrp
The configuration commands for switch B are as follows:
configure vlan vlan1 ipaddress 192.168.1.5/24 enable ipforwarding vlan vlan1 create vrrp vlan vlan1 vrid 1 configure vrrp vlan vlan1 vrid 1 add 192.168.1.3 enable vrrp