Configuring Network VLAN Ports for VLAN Translation
When subscriber VLAN
traffic exits a network VLAN port, it can be untagged, tagged (with the subscriber VLAN tag),
or translated (to the network VLAN tag).
Note
All traffic
that exits a subscriber VLAN port uses the subscriber VLAN tag, unless the port is
configured as untagged. There is no need to configure VLAN translation (from network to
subscriber VLAN tag) on subscriber VLAN ports.
To configure network VLAN ports for VLAN translation,
use the following command and specify the network VLAN and port
numbers:
If you want to later reconfigure a port that is configured
for VLAN translation so that it does not translate tags, use the following command and
specify either the tagged or the untagged
option:
