A policy intended to be used as an ACL is
applied to an interface, and the CLI command option is named aclname.
Supply the policy name in place of the aclname
option.
-
To apply an ACL policy, enter the command:
configure
access-list aclname [any | ports port_list ] {ingress | egress}
When you use the any keyword,
the ACL is applied to all the interfaces and is referred to as the
wildcard ACL. This ACL is evaluated for any ports without specific
ACLs, and it is also applied to any packets that do not match the
specific ACLs applied to the interfaces.
When an ACL is already
configured on an interface, the command is rejected and an error
message is displayed.
-
To remove an ACL from an interface, enter the
command:
unconfigure
access-list policy_name {any | ports port_list } {ingress | egress}
-
To display the interfaces that have ACLs configured and
the ACL that is configured on each. enter the command:
show
access-list {any | ports port_list } {ingress | egress}
