To specify the destination
VLAN after
you created the local network login account, use the following command:
configure netlogin local-user user-name {vlan-vsa [[{tagged | untagged} [vlan_name | vlan_tag]] | none]}
Where the following is true:
- tagged—Specifies that the client be added as tagged
- untagged—Specifies that the client be added as untagged
- vlan_name—Specifies the name of the destination VLAN
- vlan_tag—Specifies the VLAN ID, tag, of the destination VLAN
- none—Specifies
that the VSA 211 wildcard (*) is applied, only if you do not specify tagged or
untagged
The following example:
- Modifies a previously created local network login account.
- Specifies that clients are added as tagged to the VLAN.
- Adds the VLAN blue as the destination VLAN.
configure netlogin local-user megtest vlan-vsa tagged "blue"
