Equal-cost Multi-path Routing (ECMP) Hashing Alternatives for
IPv4/IPv6
You can dynamically choose between the existing
ECMP hash method ("default") and the
“custom” hash method. Within each of these two hash methods, several hash algorithm options are
available to vary traffic distribution among multiple equal-cost IP gateways.
Note
Custom hashing
method is not supported on the X440-G2 and X620 series switches.
To configure the hash method, use the following command:
configure iproute sharing hash-method
custom {hash-algorithm [xor | crc-16 | crc-32 [lower | upper]]}