PIM Multicast Routing Over GRE Tunnels

Version 32.3 adds the ability to configure IPv4 Protocol Independent Multicast (PIM) traffic over GRE tunnels. PIM control packets are exchanged between GRE tunnel endpoints, forming a PIM neighborship across the GRE tunnel. Similar to IPv4 unicast support on GRE tunnels, multicast data packets are routed from a tenant interface to the far end of the IPv4 GRE tunnel. The IPv4 next-hop for the multicast packets is the IPv4 tunnel IP of the BGP neighbor.

Supported Platforms

ExtremeSwitching X590, X695, and X465 series switches

Limitations

This feature has the following limitations:

The maximum number of GRE tunnels supported is 64.
The maximum number of VRs supported is 32.
Routing across VRs is not supported.
IPv6 multicast routing over tunnel is not supported.
MSDP is not supported with this feature.
Stacking is only supported on ExtremeSwitching X590 and X465 series switches.