ONMD Messages

ONMD-1000

Message: LLDP is enabled.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Link Layer Discovery Protocol (LLDP) is enabled globally.

Recommended Action: No action is required.

ONMD-1001

Message:LLDP is disabled.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Link Layer Discovery Protocol (LLDP) is disabled globally.

Recommended Action: No action is required.

ONMD-1002

Message: LLDP global configuration is changed.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Link Layer Discovery Protocol (LLDP) global configuration has been changed.

Recommended Action: No action is required.

ONMD-1003

Message: LLDP is enabled on interface <InterfaceName>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Link Layer Discovery Protocol (LLDP) is enabled on the specified interface.

Recommended Action: No action is required.

ONMD-1004

Message: LLDP is disabled on interface <InterfaceName>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Link Layer Discovery Protocol (LLDP) is disabled on the specified interface.

Recommended Action: No action is required.

ONMD-1005

Message: Feature Mismatch: <Feature>, will re-negotiate.

Message Type: DCE

Severity: INFO

Probable Cause:Indicates that the content of the specified feature does not match with the link partner.

Recommended Action: Change the feature setting at both ends of the link to match.

ONMD-1006

Message: Timed out waiting for LLDP PDUs on <InterfaceName> from MAC address <MacAdress>.

Message Type: DCE

Severity: INFO

Probable Cause:Indicates that the Link Layer Discovery Protocol (LLDP) PDUs are not received from the neighbor for the configured period of time.

Recommended Action: No action is required.

ONMD-1007

Message: Received First LLDP PDU on <InterfaceName> from MAC address <MacAdress> after LLDP RX enabled or timeout.

Message Type: DCE

Severity: INFO

Probable Cause:Indicates that the Link Layer Discovery Protocol (LLDP) PDUs are being received from the neighbor.

Recommended Action: No action is required.

ONMD-1008

Message: Received shutdown LLDP PDUs with TTL=0 on <InterfaceName> from MAC address <MacAdress>.

Message Type: DCE

Severity: INFO

Probable Cause:Indicates that shutown Link Layer Discovery Protocol (LLDP) PDUs are received.

Recommended Action: No action is required.