DOT1 Messages

DOT1-1001

Message: 802.1X is enabled globally.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that 802.1X is enabled globally.

Recommended Action: No action is required.

DOT1-1002

Message:802.1X is disabled globally.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that 802.1X is disabled globally

Recommended Action: No action is required.

DOT1-1003

Message: 802.1X is enabled for interface <port_name>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that 802.1X is enabled on the specified interface.

Recommended Action: No action is required.

DOT1-1004

Message: interface <port_name> is forcefully unauthorized.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified interface has been unauthorized forcefully using the <cmd>dot1x port-control force-unauthorized</cmd> command.

Recommended Action: No action is required.

DOT1-1005

Message: 802.1X authentication is successful on interface <port_name>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that authentication has succeeded on the specified interface.

Recommended Action: No action is required.

DOT1-1006

Message: 802.1X authentication has failed on interface <port_name>.

Message Type: DCE

Severity: WARNING

Probable Cause: Indicates that authentication has failed on the specified interface due to incorrect credentials or the remote authentication dial-in user service (RADIUS) server is not functioning properly.

Recommended Action: Check the credentials configured with the supplicant and RADIUS server. You can reconfigure the attributes on the RADIUS server using the radius-server command.

DOT1-1007

Message: No RADIUS server available for authentication.

Message Type: DCE

Severity: CRITICAL

Probable Cause: Indicates that there is no remote authentication dial-in user service (RADIUS) server available for authentication.

Recommended Action: Check whether the configured RADIUS servers are reachable and are functioning.

DOT1-1008

Message: interface <port_name> is forcefully authorized.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified interface has been authorized forcefully using the dot1x port-control forced-authorized command.

Recommended Action: No action is required.

DOT1-1009

Message: 802.1X is disabled for interface <port_name>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that 802.1X is disabled on the specified interface.

Recommended Action: No action is required.

DOT1-1010

Message: interface <port_name> is set in auto mode.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified interface is set to auto mode.

Recommended Action: No action is required.

DOT1-1011

Message: DOT1X_PORT_EAPOL_CAPABLE: Peer with MAC <mac1><mac2>.<mac3><mac4>.<mac5><mac6> connected to interface <port_name> is EAPOL Capable

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the peer connected to the specified interface is DOT1X-capable.

Recommended Action: No action is required.

DOT1-1012

Message: DOT1X_PORT_EAPOL_CAPABLE: Peer connected to interface <port_name> is NOT EAPOL capable.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the peer connected to the specified interface is not DOT1X-capable.

Recommended Action: No action is required.

DOT1-1013

Message: DOT1X test timeout value is set to <Updated test timeout value>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the DOT1X test timeout value has been changed to the specified value.

Recommended Action: No action is required.

DOT1-1014

Message: DOT1X Radius Dynamic VLAN assignment failure. Missing Radius attribute(s) TunnelType / TunnelMediumType for interface <port_name> user: <User Name>.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that the DOT1X required Radius attribute(s) is/are missing.

Recommended Action: Include both Radius attributes TunnelType and TunnelMediumType along with attribute PrivateGroupId in the Radius Server.

DOT1-1014

Message: DOT1X Radius Dynamic VLAN assignment failure. Missing Radius attribute(s) TunnelType / TunnelMediumType for interface <port_name> user: <User Name>.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that the DOT1X required Radius attribute(s) is/are missing.

Recommended Action: Include both Radius attributes TunnelType and TunnelMediumType along with attribute PrivateGroupId in the Radius Server.

DOT1-1015

Message: Access port is already associated with VLAN assigned by Radius.

Message Type: DCE

Severity: INFO

Probable Cause:Access port is already assigned with VLAN.

Recommended Action: No action is required.