Message:interface <InterfaceName> is online.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has come online after the protocol dependencies are resolved.
Recommended Action: No action is required.
Message: interface <InterfaceName> is protocol down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone offline because one of the protocol dependency is unresolved.
Recommended Action: Check for the reason codes using the show interface command and resolve the protocol dependencies.
Message: interface <InterfaceName> is link down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone offline because the link was down.
Recommended Action: Check whether the connectivity is proper and the remote link is up.
Message: <InterfaceName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been created
Recommended Action: No action is required.
Message: Chassis is <status>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the chassis has been enabled or disabled.
Recommended Action: No action is required.
Message: <InterfaceName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been deleted.
Recommended Action: No action is required.
Message: InterfaceMode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface mode has been changed.
Recommended Action: No action is required.
Message: OperationalEndpointMode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface operational endpoint mode has been changed.
Recommended Action: No action is required.
Message: VLAN classifier group <group_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been created.
Recommended Action: No action is required.
Message: VLAN classifier group <group_id> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been deleted.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier rule has been created.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier rule has been deleted.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is <action> on VLAN classifier group <group_id>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been modified.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is <action> on interface <Logical_InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface member list has been changed.
Recommended Action: No action is required.
Message: <count> VLANs <except> will be allowed on interface <Logical_InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the VLAN membership has been changed for the specified interface.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively up.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface administrative status has changed to up.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface administrative status has changed to down.
Recommended Action: No action is required.
Message: Interface IP overlap with management IP <ipAddr> ifname:<ifname>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the IP address configured on the interface overlaps with the management IP address.
Recommended Action:Change the interface IP address using the ip address command.
Message: FCoE configuration has been <Option> on interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) configuration has been enabled or disabled on the specified interface.
Recommended Action: No action is required.
Message: RBridge ID <RBridgeId> has joined Port-channel <PortChannelKey>. Port-channel is a vLAG with RBridge IDs <RBridgeList>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified RBridge has joined the virtual link aggregation group (vLAG).
Recommended Action: No action is required.
Message: RBridge ID <RBridgeId> has left Port-channel <PortChannelKey>. Port-channel is a vLAG with RBridge IDs <RBridgeList>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified RBridge has left the virtual link aggregation group (vLAG).
Recommended Action: No action is required.
Message: RBridge ID <RBridgeId> has left Port-channel <PortChannelKey>. Port-channel has only RBridge ID <RbridgeList> and is no longer a vLAG.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the virtual link aggregation group (vLAG) no longer exists.
Recommended Action: No action is required.
Message: <SFPType> transceiver for interface <InterfaceName> is inserted.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that a (SFP/CFP2) transceiver has been inserted in the specified interface.
Recommended Action: No action is required.
Message: <SFPType> transceiver for interface <InterfaceName> is removed.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that a transceiver (SFP or CFP2) has been removed from the specified interface.
Recommended Action: No action is required.
Message: Incompatible SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an incompatible small form-factor pluggable (SFP) transceiver for the interface has been inserted.
Recommended Action: Disable the interface using the shutdown command and insert an SFP transceiver that is supported on the interface. After the SFP transceiver is inserted, re-enable the interface using the no shutdown command.
Message: Failed to read SFP transceiver for interface <InterfaceName>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates failure to read the small form-factor pluggable (SFP) transceiver for the specified interface.
Recommended Action: Disable the interface using the shutdown command and re-insert the SFP transceiver. After the SFP transceiver is inserted, re-enable the interface using the no shutdown command. If the problem persists, contact your switch service provider.
Message: Interface <InterfaceName> is administratively down due to speed mismatch in port-channel.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone down due to mismatching speed in the port-channel.
Recommended Action: Set the correct speed for the interface using the speed command.
Message: Session <SessionNumber> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session has been created.
Recommended Action: No action is required.
Message: Session <SessionNumber> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session has been deleted.
Recommended Action: No action is required.
Message: Session <SessionNumber> configuration is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session configuration has been deleted.
Recommended Action: No action is required.
Message: Session <SessionNumber> configuration is added.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified session configuration has been added.
Recommended Action: No action is required.
Message: Description for Session <SessionNumber> is added.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the session description has been added.
Recommended Action: No action is required.
Message: Description for Session <SessionNumber> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the session description has been deleted.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively down due to <LinkSpeed> link configured on Extreme Trunk.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone down because a 1 Gbps link has been configured on the Extreme trunk.
Recommended Action: Remove the 1 Gbps link from the Extreme trunk or change the 1 Gbps small form-factor pluggable (SFP) transceiver.
Message: Private VLAN mode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface private VLAN mode has been changed.
Recommended Action: No action is required.
Message: Unsupported Extreme-branded SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an unsupported Extreme-branded small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: Interface <InterfaceName> is unprovisioned.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been unprovisioned.
Recommended Action: No action is required.
Message: interface <InterfaceName> is provisioned.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been provisioned.
Recommended Action: No action is required.
Message: Unqualified SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity:WARNING
Probable Cause: Indicates that an unqualified Extreme-branded small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a qualified Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: Unsupported SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an unsupported small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a qualified Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: interface <InterfaceName> is disabled by port link dampening.
Message Type: DCE
Severity:INFO
Probable Cause: Indicates that the interface disabled due to port link dampening.
Recommended Action: No action is required.
Message: interface <InterfaceName> is enabled by port link dampening.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the interface enabled due to port link dampening.
Recommended Action: No action is required.
Message: Topology group <TopoGrpId> master VLAN replaced from <OldmasterVlan> to <NewmasterVlan>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the master VLAN for the topology group has been replaced.
Recommended Action: No action is required.
Message: <VlanBd> <VlanBdId> configured as <MasterMember> of Topology group <TopoGrpId>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates the VLAN/BD is configured as master/member for the topology group.
Recommended Action: No action is required.
Message: <VlanBd> <VlanBdId> removed from Topology group <TopoGrpId>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates the master/member VLAN/BD removed from the topology group.
Recommended Action: No action is required.
Message: Topology group <TopoGrpId> deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates topology group is deleted.
Recommended Action: No action is required.
Message: Message type <MessageType> length <MessageSize> from <ClientName> is too large.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that a message from the NSM client could not be processed because of its size.
Recommended Action:Increase size of NSM daemon buffer.
Message: <InterfaceName> interface is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified physical/insight interface has been deleted.
Recommended Action: No action is required.
Message: IP unnumbered intf <InterfaceName> vrf must be same as donor inttf <InterfaceName> .
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that ip unnumbered interface vrf is not same as donor interface vrf .
Recommended Action:Both unnumbered interface and donor interface vrf should be same.
Message: interface <InterfaceName> TAG Type Changed to 0x<tpid>.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that interface TAG Type is being configured.
Recommended Action: No action is required.
Message: Tunnel <TunnelName> creation failed.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the tunnel creation was unsuccessful.
Recommended Action: Technical support is required.
Message: VNI mapping for VLAN <VLAN> was unsuccessful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not map VNI to the VLAN for a VxLAN tunnel.
Recommended Action: Technical support is required.
Message: Enabling flooding for <TunnelName> was unsuccessful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not enable flooding for the specific tunnel.
Recommended Action: Technical support is required.
Message: P2P BD <BDId> not extended Vxlan Tunnel <TunnelName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not extend p2p BD on vxlan tunnel.
Recommended Action: P2P BD can not be extended over vxlan tunnel.
Message: Port-profile <ProfileName> activation succeeded.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile activation was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> activation failed, reason <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile activation was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> deactivation succeeded.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile deactivation was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> deactivation failed, reason <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile deactivation was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> application succeeded on <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile application was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> application failed on <InterfaceName>, reason <Reason>, removing any applied configuration.
Message Type: DCE
Severity:ERROR
Probable Cause: Indicates that the profile application on the specified interface was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> removed successfully on <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified port-profile has been removed successfully.
Recommended Action: No action is required.
Message: interface <InterfaceName> became port-profile-port.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile configuration mode has been enabled on the specified interface using the port-profile-port command.
Recommended Action: No action is required.
Message: Interface <InterfaceName> became non-port-profile-port.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile configuration mode has been disabled on the specified interface using the no port-profile-port command.
Recommended Action: No action is required.
Message: Interface <InterfaceName> could not become non-port-profile-port.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that the port-profile configuration mode could not be disabled on the specified interface using the no port-profile-port command.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> removal failed on <InterfaceName>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified port-profile could not be removed.
Recommended Action: Execute the copy support command and contact your switch service provider.
Message: MAC <ProfileMac> is associated to port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of the Virtual Machine (VM) Media Access Control (MAC) address with the specified port-profile.
Recommended Action: No action is required.
Message: MAC <ProfileMac> is disassociated from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of the Virtual Machine (VM) Media Access Control (MAC) address from the specified port-profile.
Recommended Action: No action is required.
Message: VLAN sub-profile for port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Cause Indicates that the VLAN sub-profile has been created successfully.
Recommended Action: No action is required.
Message: Access VLAN <VlanId> is configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the untagged VLAN has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: Access VLAN is deleted from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the untagged VLAN has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is configured for switching properties.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the switching properties have been configured on the specified port-profile using the switchport command.
Recommended Action: No action is required.
Message: Switching properties are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the switching properties have been removed from the specified port-profile using the no switchport command.
Recommended Action: No action is required.
Message: The <ModeName> mode is configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified mode has been configured for the port-profile using the switchport mode command.
Recommended Action: No action is required.
Message: The <ModeName> mode is de-configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified mode has been removed for the port-profile using the switchport mode command.
Recommended Action: No action is required.
Message: The tagged VLANs <TaggedVlanStr> are configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified tagged VLANs are configured in the VLAN sub-profile.
Recommended Action: No action is required.
Message: The tagged VLANs <TaggedVlanStr> are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified tagged VLANs have been removed from the VLAN sub-profile.
Recommended Action: No action is required.
Message: The tagged VLANs except <TaggedVlanStr> are configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that except the specified tagged VLANs, all other tagged VLANs are configured in the VLAN sub-profile.
Recommended Action: No action is required.
Message: All VLANs are configured as tagged VLANs for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all the available tagged VLANs are configured in the specified VLAN sub-profile.
Recommended Action: No action is required.
Message: All tagged VLANs are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all the available tagged VLANs have been from the specified VLAN sub-profile.
Recommended Action: No action is required.
Message: Native VLAN <VlanId> is configured to port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the native VLAN has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: Native VLAN is deleted from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the native VLAN has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: FCoE sub-profile for port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) sub-profile has been created for the specified port-profile.
Recommended Action: No action is required.
Message: FCoE port is configured successfully for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) port has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: FCoE port is removed successfully for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) port has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified port-profile has been created successfully.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is removed.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified port-profile has been removed successfully.
Recommended Action: No action is required.
Message: VLAN sub-profile for port-profile <ProfileName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the VLAN sub-profile has been deleted successfully.
Recommended Action: No action is required.
Message: FCoE sub-profile for port-profile <ProfileName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) sub-profile has been deleted successfully.
Recommended Action: No action is required.
Message: Non-profiled-macs on profiled ports will be <allowflag>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the non-profiled media access control (MAC) entries on the profiled port will be allowed or dropped.
Recommended Action: No action is required.
Message: Association of MAC address: <MAC> failed. Reason : <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error occurred during port-profile to media access control (MAC) association.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: De-Association of MAC address: <MAC> failed. For Port-profile : <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error occurred during port-profile to media access control (MAC) de-association.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Bulk MAC association is Success for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all media access control (MAC) entries are successfully associated with the specified port-profile.
Recommended Action: No action is required.
Message: Bulk MAC de-association is Success for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all media access control (MAC) entries are successfully de-associated with the specified port-profile.
Recommended Action: No action is required.
Message: Ctag <Ctag> is associated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of the c-tag with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: MAC <Mac> is associated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of Media Access Control (MAC) with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: Ctag <Ctag> is deassociated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of the c-tag with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: MAC <Mac> is deassociated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of Media Access Control (MAC) with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: Domain: <DomainName> creation successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified domain is created.
Recommended Action: No action is required.
Message: Domain deletion <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified domain is deleted.
Recommended Action: No action is required.
Message: Profile: <ProfileName> addition to domain <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile is added to the specified domain.
Recommended Action: No action is required.
Message: Profile <ProfileName> deletion from domain <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile is deleted from the specified domain.
Recommended Action: No action is required.
Message: VLAN classifier mac-group <group_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier MAC group has been created.
Recommended Action: No action is required.
Message: DAD failed for IPv6 address <IPv6 Address> on interface <Interface name>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the DHCP Auto Deployment (DAD) process failed for the specified IPv6 address.
Recommended Action: Delete the rejected IPv6 address and configure a corrected IPv6 address.
Message: Netdevice creation failed for interface <Interface name>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the system could not create a netdevice for the specified interface.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> application failed on <InterfaceName>, for vlan <Vlan>, reason <Reason>
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile application on the specified interface was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: VLAN <VLAN ID> is <action> on interface <InterfaceName> for Client: <Client MAC> by Dot1x.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Radius Dynamic VLAN is changed by dot1x.
Recommended Action: No action is required.
Message: Unnumbered Intf's peer ipv4 addr <IPv4 Address> is overlapped and can't be added on interface <InterfaceName>,reason <reason>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that invalid peer address is received.
Recommended Action: change unnumbered peer ipv4 address.
Message: Chassis beaconing is enabled
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that chassis beaconing is enabled
Recommended Action: No action is required.
Message: Chassis beaconing is disabled
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that chassis beaconing is disabled
Recommended Action: No action is required.
Message: Interface beaconing on <InterfaceName> is enabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface beaconing is enabled.
Recommended Action: No action is required.
Message: Interface beaconing on <InterfaceName> is disabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface beaconing is disabled.
Recommended Action: No action is required.
Message: Interface loopback on <Interface Name> is enabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface loopback is enabled.
Recommended Action: No action is required.
Message: Interface loopback on <Interface Name> is disabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface loopback is disabled.
Recommended Action: No action is required.
Message: BD ID <BD ID> of type <BD Type> is Operationally UP.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is operationally UP.
Recommended Action: No action is required.
Message: BD ID <BD ID> of type <BD Type> is Operationally DOWN.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is operationally DOWN.
Recommended Action: No action is required.
Message: First pw lif in BD <BD ID> is Operationally UP.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the first pw lif in BD is operationally UP.
Recommended Action: No action is required.
Message: Last pw lif in BD <BD ID> is Operationally down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the last pw lif in BD is operationally down.
Recommended Action: No action is required.
Message: Bridge Domain <BD ID> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is created.
Recommended Action: No action is required.
Message: Bridge Domain <BD ID> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is deleted.
Recommended Action: No action is required.
Message: <pkt-encap-processing feature> is <enable> on interface <interface>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates the config received from dcmd.
Recommended Action: No action is required.