Message: Port <port number> Faulted because of many Link Failures.
Message Type:LOG
Severity: WARNING
Probable Cause: Indicates that the specified port is disabled because of multiple link failures on the port that have exceeded the threshold internally set on the port. This problem is related to the hardware.
Recommended Action: Check and replace (if necessary) the hardware attached to both the ends of the specified port, including:
• The small form-factor pluggable (SFP)
• The cable (fiber-optic or copper inter-switch link (ISL))
• The attached devices
After checking the hardware, execute the no shutdown command to re-enable the port.
Message:Port <port number> (0x<port number (hex)>) could not be enabled because it is disabled due to long distance.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the specified port cannot be enabled because other ports in the same group have used the buffers of this port group. This happens when other ports are configured to be long distance.
Recommended Action: To enable the specified port, perform one of the following actions:
• Reconfigure the other E_Ports so that they are not long distance.
• Change the other E_Ports so that they are not E_Ports.
This will free some buffers and allow the port to be enabled.
Message: An SFP transceiver for interface Fibre Channel <interface tuple string> is removed.
Message Type:LOG
Severity: INFO
Probable Cause: Indicates that a small form-factor pluggable (SFP) transceiver has been removed from the specified port.
Recommended Action: No action is required.
Message: An SFP transceiver for interface Fibre Channel <interface tuple string> is inserted.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that a small form-factor pluggable (SFP) transceiver has been inserted into the specified port.
Recommended Action: No action is required.
Message: An incompatible SFP transceiver for interface Fibre Channel <interface tuple string> is inserted.
Message Type:LOG
Severity: INFO
Probable Cause: Indicates that an incompatible small form-factor pluggable (SFP) transceiver has been inserted into the specified port.
Recommended Action: No action is required.
Message: Interface Fibre Channel <interface tuple string> is online.
Message Type:LOG
Severity: INFO
Probable Cause: Indicates that the specified Fibre Channel interface has come online after the protocol dependencies are resolved.
Recommended Action: No action is required.
Message: Interface Fibre Channel <interface tuple string> is link down.
Message Type:LOG
Severity: INFO
Probable Cause: Indicates that the specified Fibre Channel interface has gone offline because the link is down.
Recommended Action:Check whether the connectivity is proper and the remote link is up.
Message: Interface Fibre Channel <interface tuple string> is administratively up.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates that the administrative status of the specified Fibre Channel interface has changed to up.
Recommended Action:No action is required.
Message: Interface Fibre Channel <interface tuple string> is administratively down.
Message Type: LOG
Severity:INFO
Probable Cause: Indicates that the administrative status of the specified Fibre Channel interface has changed to down.
Recommended Action: No action is required.